For more information contact Victor Caron

Intercon Pulp Rail Car and Chip Truck Dumper System.

  Dumper size

Blower: Allis Chalmers Centrifugal Compressor, Serial no. C-504-4403, Model E-24-JR, Inlet pressure 13.37 P.S.I.A., Inlet temp. 110 deg. F., Discharge pressure 20.37 P.S.I.A., Horsepower 945, Volume 26800 A.C.F.M., RPM. 5400. 

Reducer: Dominion, double reduction, model no. SI-167 A, 4.487:1 ratio, orig. serial no. 402-7512.

Electric motor: CGE, synchronous, model ODP-108129, serial no. 931367, 1000 hp., 1200 rpm, frame 766S, 2300 volt, Sf. 1.15, enclosure ODP, weight 7000 lbs., temp rise 40, Fl amps 246, shaft size 4.125, bearing ode SKF 6320, bearing de SKF 6321, insulation class F, winding type FORM.
Hydraulics: Vickers Pumps, Model no. 3525V38A171(DC101)(1BB-20), size 30, rotation CW, impeller vanes piston steel, suction & discharge 1", rpm 1745

Tank: Vickers, 900 gal., Sae grade Esso nuto H 32. Filter: Denison, model no. Su885F48 1.25". Oil heater: Hunt & Moscrop, steam unit 30", model DHA-301, serial no. HMG-10227, 570 lbs, 30" fan, fan rpm 1140.

Electric motors: Model 109510, No. 945575, Hp. 60, Speed 1775, Volt 550, Amp 60, CEMA design B Type K FR: 404U, weight 775 lbs. shaft size 2.375, Dodge PX100 coupling

Directional Control Valve: Parker Hannifin D63W8C34Y 34 also Pressure Control Valve: Parker R10PH also Pressure Control: Parker Hannifin R2SP2SK4SN

Hydraulic Cylinder lift: Ohio Industries Hydraulics, model no. R-505-399, 5 stage, 
Conveyer:

Motor: Baldor/ Westinghouse, C/W AB frequency drive, 75 hp., 1200Rpm., serial no. 1297C682, 405T fr., 575 volt, 1.15 sf., enclosure TEFC, weight 1408 lbs. fl amps 69.00, shaft 2.875", bearings 6313 & 6316 Coupling: Dodge PX-120 Reducer: Hamilton Gear, model no. CT-380 CI, 93.62:1 ratio, triple reduction- helical gear, serial no. 380-183, series G, 8500 lbs, handling LL, CW rotation, input rpm 1800 Sprocket: Browning, triple roller, RC200-3 (2.5"P), teeth 20drive, bore 7", teeth 45 driven 6.4375" bore Head shaft: North Pacific Steels, 4 flange sprocket, 6'Lx 23.4dia., service chain Drag Moline 8480, pitch dia. 23.39", shaft dia. 6.437", shaft lenght 8'9.125", Total length of chain 162' x 4 stands. Tail shaft: North Pacific Steels, 6'Lx 21.125"dia., 9 teeth, shaft dia. 4.4375", shaft length 7'6".
Chip Feeder: ACO, model no. 2-49S, air lock feeder, 42"x 48" rotor, serial no. SWC-895, 11,000 lbs., capacity 24,000 cu.ft.

Motor: Baldor/ Westinghouse, 15 hp, 1800 rpm, 254T fr., 575 volt, 1.15 sf., 282 lbs., fl amps 15.2, shaft size 1.625", belt size 3V 100", Reducer: Radicon, model no. 6B0-12-EB, single reduction, 40:1 ratio, orig. ser. no. 351253/67, series G, 800 lbs., CW rotation. NO picture.